CHEMICAL-SPECTRAL ANALYSIS OF LEAD-BISMUTH SLUDGES AND WASH LIQUOR FROM THE ALMALYK MINING AND METALLURGICAL COMPLEX (AMMC) FOR RESOURCE POTENTIAL ASSESSMENT AND ENVIRONMENTAL CONTROL

Tulaganova M. A. & Matkarimov S. T.


Annotatsiya

The effective management of industrial by-products requires rigorous compositional control. This study was undertaken to determine the elemental profiles of lead-bismuth sludges and acid wash liquor generated at the Almalyk Mining and Metallurgical Complex (AMMC), with the dual aim of assessing their economic potential and environmental risk profile. The analysis was carried out using (AAS) strictly following the guidelines set forth by GOST 30139–96. Samples of the sludges and acid wash were prepared through a precise process, including acid digestion and dissolution, before concentrations of key target elements Pb, Cd, Fe, Zn, Bi were quantitatively measured. Our findings show that the lead-bismuth sludges are highly enriched, containing an average of Pb 22,99%, Cd 9,19%, Fe 9,22%, S 11,24%, Bi 9,27%, validating their designation as a valuable secondary resource. Conversely, the acid wash liquor exhibited notable levels of Zn 175mg/l, Cu 12.25 mg/l and, concerningly, trace amounts of 8,7 mg/l that consistently exceeded. Analytical precision was maintained throughout, confirming compliance with the relevant GOST standards. The spectral analysis successfully mapped the compositional landscape of these industrial materials. The high concentrations of precious and non-ferrous metals in the sludges underscore a compelling case for their optimized recovery. Furthermore, the detected levels of toxic elements mandate that these components be specifically integrated into AMMC’s internal technological and environmental monitoring programs to ensure sustainable operation.


Adabiyotlar

  1. GOST 30139–96. (1996). Non-ferrous metals. Methods for determination of elements by atomic absorption spectrometry. Moscow: State Committee for Standardization.
  2. Zheng, H., Liu, Y., & Wang, X. (2020). Recovery of lead and bismuth from metallurgical residues: A review of hydrometallurgical approaches. Journal of Hazardous Materials, 389, 121851.
  3. https://doi.org/10.1016/j.jhazmat.2019.121851
  4. Sidorova, N. M., & Ivanov, A. A. (2019). Trace element analysis in non-ferrous metallurgical effluents: Environmental and economic significance. Journal of Environmental Management, 241, 373–382.
  5. https://doi.org/10.1016/j.jenvman.2019.04.058
  6. Zhao, L., Zhang, Q., & Chen, M. (2021). Advances in atomic absorption spectroscopy for multi-component analysis of metallurgical by-products. Analytical Chemistry Research, 32, 100142.
  7. Almalyk Mining and Metallurgical Complex (AMMC). (2023). Technical report on the behavior of zinc and cadmium in sulfuric acid wash circuits. Internal Technical Report No. 45/23, Almalyk, Uzbekistan.
  8. World Health Organization (WHO). (2017). Guidelines for Drinking-water Quality: Lead, Cadmium, and Selenium Parameters. Geneva: WHO Press.
  9. Rao, D., & Nayak, B. (2022). Environmental management of metallurgical wastes: A sustainability perspective. Minerals Engineering, 188, 107841.
  10. https://doi.org/10.1016/j.mineng.2022.107841
  11. European Environment Agency (EEA). (2019). Industrial Waste and By-Product Reuse in Non-Ferrous Metallurgy. Luxembourg: Publications Office of the European Union.