"IMPROVING THE EFFICIENCY OF CLEANING RAW COTTON BASED ON OPTIMIZING THE DESIGN OF THE BRUSH DRUM"
Fayziev S. K., Ibodullaev O. O., Rakhimov K. K., Muxiddinova & Razoqova. O. B.
Annotatsiya
The article thoroughly examines the process of effective separation of raw cotton from small and large trash by optimizing the design and parametric characteristics of brush drum cleaners. Based on the experimental approach, the influence of drum rotation speed, brush length and density, drum-grid distance, and aerodynamic flow velocity on cleaning efficiency was assessed. The results showed that the speed range of 600 ± 50 rpm provides the optimal balance of the drum's impulse energy, elastic deformation, and aerodynamic lift. Brush variants with a length of 110-130 mm and a density of 1.0-1.3 g/cm2 yielded maximum separation efficiency. The aerodynamic flow in the range of 8-10 m/s ensured the effective separation of up to 90% of fine-fractional impurities. The improved brush drum model increased cleaning efficiency by 10-12%, reduced fiber damage by 40%, and reduced energy consumption by 17% compared to existing analogues. The research results serve as a scientific basis for the design of new generation designs of cotton ginning machines.
Adabiyotlar
- The ICAC recorder. June 2023, Volume XXXIX, No. 2. ISSN 1022-6303. https://www.icac.org.
- Decree of the President of the Republic of Uzbekistan dated January 28, 2022 No. UP-60 "On the Development Strategy of New Uzbekistan for 2022-2026." https://www.Lex.uz.
- Rajabov O.I. Improvement of the technology of cleaning raw cotton from small impurities. dissertation work of Doctor of Philosophy (PhD) in technical sciences. Namangan - 2019. 4.Khojiyev M.T., Isayev Sh.Sh. "Creation of a device for cleaning low-grade cotton with high moisture content" Bulletin of Gulistan State University Series of Natural and Agricultural Sciences. Gulistan 2021. No. 2, pp. 30-37.
- Khodzhiev M.T., Goyibnazarov E.E., Mukhsinov I. Theoretical analysis of the process of cleaning raw cotton from small and large trash impurities based on modeling in a newly implemented mobile cleaning device. TTESI. International Scientific and Practical Conference. Tashkent 2019.
- Bobamatov. A.Kh. Improvement of the designs and development of methods for calculating the working bodies of cotton cleaners from fine particles. Dissertation for the degree of PhD. - Тошкент, 2018.
- Rajabov, O. I., Kurbonov, F. A., Abrorov, A. S., & Gafurova, M. Z. (2021, April). Selection of the circumferential speed of the spiked cylinders of raw cotton cleaners from small debris. In Journal of Physics: Conference Series (Vol. 1889, No. 4, p. 042056). IOP Publishing.
- Ibodullayev, O. O., Rasulov, E. N., & Muxidinova, S. N. THE ROLE OF OPTICAL SENSORS IN OPTIMIZING THE TECHNOLOGICAL PARAMETERS OF COTTON CLEANING MACHINES Sh Fayziyev Bukhara State Technical University.
- Juraev, A., Sayitkulov, S., Kholmirzaev, J., Haydarov, B., & Mustafaev, N. 2024, January). Substantiated parameters of multifaceted grates in coarse cleaning zones of a cotton gin. In AIP Conference Proceedings (Vol. 2969, No. 1, p. 050027). AIP Publishing LLC.
- Rakhmonov, H., Matyakubova, J., & Fayziev, S. (2025). Optimization of the processes of simultaneous transportation, drying and cleaning of raw cotton in screw dryers-cleaners. Modern Innovations, Systems and Technologies, 5 (3), 3018-3027.
- Kurbanov, F. A., Temirov, A., & Sharopov, M. (2019). ROLLER GIN BLOWING BODY AND ITS INFLUENCE ON GINING PERFORMANCE. Internauca, (14-1), 71-73.
- Djuraev, A., Sayitqulov, S., Nurboev, R., Xolmirzaev, J., & Berdimurodov, U. (2022). Analysis of full-factorial experiments on improving the cotton gin. Modern Innovations, Systems, and Technologies, 2 (1), 69-75.
- Sayitkulov, S., Nurmatova, N., Sharipov, J., Salomov, A., & Saidova, G. (2024). Optimization of parameters on the combined cotton cleaning machine and analysis of cleaning efficiency. In E3S Web of Conferences (Vol. 508, p. 08020). EDP Sciences.
- Fayziev, S. H., Fatullaeva, S. I., & Nazhmiddinov, I. P. (2023). Influence of density and temperature on moisture release rate during cotton raw material drying. In Fundamental and applied scientific research in the field of inclusive design and technologies: experience, practice and prospects (pp. 135-140).
- Kh, F. S., Fatullaeva, S. I., & Kh, T. O. (2022). Theoretical and experimental study of the influence of temperature, humidity and density on the drying process of raw cotton. Eurasian journal of medical and natural sciences, Innovative Academy Research Support Center, 2 (01), 66-71.