INFLUENCE OF GEOMETRIC PARAMETERS OF GRANULAR PARTICLES ON FLUIDIZATION QUALITY
Jalilov R. S.
Annotatsiya
Currently, one of the most expensive types of energy is thermal. Its high cost is determined both by the production itself and by the efficiency of its transfer and use. Shell-and-tube heat exchangers with significant dimensions, high degree of contamination and short service life of the tube bundle are widely used in the energy, chemical, oil refining, food and other industries.It is well known that the most promising way to solve the problem of reducing weight and dimensions, or increasing heating capacity with the same size of heat exchangers is to intensify heat exchange. Various methods of intensification of convective heat transfer are proposed and investigated. When choosing a method of heat exchange intensification for practical use, one has to take into account not only the efficiency of the surface itself, but also its versatility for various single-phase and two-phase heat transfer media, the manufacturability of the heat exchange surface or a method for increasing the efficiency of heat exchange equipment, strength requirements, surface contamination, operational features, etc. But, first of all, when choosing a specific method of heat exchange intensification, you need to be sure that it is effective enough, and not at all, but for specific operating conditions of the device. Passive methods of heat transfer intensification, which contribute to increased flow turbulence, meet these requirements most of all. The problem of heat exchange intensification in pipes with a moderate increase in pressure drop can be solved by creating fluidization of solid particles in the upstream of the main coolant. The intensity of heat transfer in a fluidized bed is significantly higher than in a single-phase gas stream in an empty pipe or filled with a fixed granular material. The intensification of heat transfer from the wall to the fluidized gas layer has been studied in sufficient depth and it has been found that the heat transfer coefficient increases more than twofold compared to an apparatus without solid particles.
Adabiyotlar
- Fluidization. / V.G. Ainstein, A.P. Baskakov et al.; edited by V.G. Ainstein. - M.: Chemistry, 1991. - 440 p.
- General course of processes and devices of chemical technology. In 2 books. / Ainstein V.G., Zakharov M.K., Nosov G.A. and others; edited by V.G. Ainstein. - M.: Higher School, 2003. - 912 p.
- Aerov M.E., Todes O.M. Hydraulic and thermal principles of operation of devices with stationary and fluidized granular layer. - L.: Chemistry, 1968. 512 p.
- Gelperin N.I., Einstein V.G., Kvasha V.B. Fundamentals of fluidization technology, Moscow: Khimiya, 1968, 664 p.
- Kasatkin A.G. Basic processes and devices of chemical technology, Moscow: Allianz, 2005, 750 p.
- Experimental study of the hydrodynamics of two-phase flows (mixtures and jets) in backfills with spherical particles. / G.A. Filippov, L.E. Melamed, V.P. Matyushkin et al. // Thermophysics of high temperatures. - Moscow, 2004. Vol. 42. - No. 6. - pp. 954-960.