PRESSURE-DIFFERENTIAL OPENING OF PUMPKIN SEEDS IN A BAROCHAMBER: PROCESS OPTIMIZATION AND PRESERVATION OF KERNEL INTEGRITY
Yoqubov M. E. & Zaripova M. D.
Annotatsiya
Pumpkin seeds are a high-value raw material for the food, pharmaceutical, and vegetable oil industries, and the efficiency of their processing is strongly dependent on preserving kernel integrity during shell opening. Conventional mechanical dehulling methods predominantly rely on impact and friction forces, which frequently lead to kernel breakage and deterioration of quality indicators. This study aims to provide a comprehensive scientific justification for pressure-differential opening of pumpkin seeds using controlled vacuum and overpressure cycles in a barochamber. The effects of pressure differential, cycle duration, number of cycles, moisture content, and temperature on shell opening efficiency and kernel integrity were experimentally evaluated. The results demonstrate that alternating vacuum and overpressure application induces controlled microcrack formation within the shell structure, significantly increasing the shell opening ratio while reducing kernel damage compared with mechanical methods. Optimal operating conditions were identified within moderate pressure ranges that ensure a balance between shell brittleness and kernel elasticity. The proposed technology represents a promising, energy-efficient, and quality-preserving approach for industrial-scale pumpkin seed processing.
Adabiyotlar
- Fellows, P. J. (2017). Food Processing Technology: Principles and Practice (4th ed.). Woodhead Publishing, Cambridge, UK.
- Astanov S., Turdiyev M.R., Yo‘qubov M.E., Qosimova G.K. Tibbiyot va oziq-ovqat sanoati uchun qobig‘i ochilgan qovoq urug‘larini olish usuli. – O‘zbekiston Respublikasi ixtiro patenti UZ IAP 07182, 30.12.2022.
- Yoqubov M. E., Xaitov R. A. Ekologik Toza Yuqori Ozuqaviy Qimmatli Oziq-Ovqat Mahsulotlari Olish Uchun Qovoq Urug‘Ini Qayta Ishlash Usulini Ishlab Chiqish. Development Of Science 2025 / 5, Issue 5. Volume 2.
- Aguilera, J. M., & Stanley, D. W. (2019). Microstructural Principles of Food Processing and Engineering (3rd ed.). Springer, New York, USA.
- Mujumdar, A. S. (2020). Handbook of Industrial Drying (5th ed.). CRC Press, Boca Raton, FL, USA.
- Smith, A. L., Jones, R. T., & Patel, K. (2016). Impulse pressure treatment of agricultural materials: Kinetics and structural response. Journal of Food Engineering, 178, 12–21.
- Shahin, M. A., & Symons, S. J. (2015). Seed mechanical properties and their dependence on moisture content. Biosystems Engineering, 134, 16–28.
- Krivenko, V. N., & Sorokin, A. L. (2018). Failure and crack formation in porous materials under cyclic pressure loading. Powder Technology, 330, 1–10.
- Ivanov, S. P., & Petrova, N. V. (2020). Pressure-based technologies in food processing: Equipment and process fundamentals. Food and Bioproducts Processing, 119, 1–12.
- Zhou, L., Zhang, M., & Fang, Z. (2021). Effects of pressure-based treatments on microstructure and quality of oil-rich seeds. Postharvest Biology and Technology, 175, 111482.
- Rahman, M. S. (2009). Food Properties Handbook (2nd ed.). CRC Press, Boca Raton, FL, USA.
- Abduganiyev, A. A., & Rakhimov, J. M. (2021). Moisture-dependent physical and mechanical properties of seeds and grains. Agricultural Engineering International: CIGR Journal, 21(4), 155–165.
- Ermatov, B. A., & Usmanov, S. B. (2019). Mechanical processing of agricultural raw materials: Theory and applications. Agricultural Engineering International: CIGR Journal, 21(3), 134–142.