STUDY OF THE IMPACT OF IMPROVED SUPPLIER ON PRODUCT QUALITY AND GRAIN EFFICIENCY
Sulaymonov R. S., Omonov Z. J. & Sardor A. K.
Annotatsiya
A pilot version of a combed screen was manufactured for effective cleaning and ginning of cotton in a saw gin. The pilot version was installed on a 30-saw gin feeder model 5DP-130 in the technological laboratory of the Research Institute of Fiber Crops, the gin was improved, and comparative research was conducted with a 30-saw gin 5DP-130 with a mesh surface feeder in the laboratory. The research work was carried out based on theoretical and practical results, with a combed screen selected with a coverage angle of 180 0 and a comb spacing of 8 mm. During the experimental work, it was found that when cleaning cotton picked by the Namangan-77 selection machine in a feeder with a grid, the cleaning efficiency of the feeder was on average 18.6-15.7%, which is on average 2.9-1.9 (abs)% higher than that of a gin with a mesh surface. The damage to the seed produced during cotton ginning was on average 3.01-2.84, which, in turn, decreased by 0.3-0.14 (abs)% compared to that produced by a 30-saw gin with a mesh surface feeder. In this case, the productivity of the gin changed from an average of 324 kg/h to 344 kg/h, which is on average 23-32 kg/h higher than that of the gin with a mesh surface feeder. When the fiber after ginning was cleaned in a 5VP fiber cleaner, the average fiber impurity was 2.11-1.96%, and the quality index was studied, which corresponds to the I grade "High" and "Good" classes according to the state standard UzSst 604:2016.
Adabiyotlar
- R.Sh. Sulaymonov, ZJ Omonov, JJ Dusiyorov. Research on the efficiency of the sawdust-cleaner . Scientific, technical and practical journal of composite materials of Uzbekistan. №4, Tashkent. 2023. 187-190 p.
- R.Sh.Sulaymonov, ZJOmonov. Innovative technology for cleaning cotton from small impurities Problems and prospects of innovative techniques and technologies in the agricultural food chain // Proceedings of the IV International Scientific and Technical Conference. –Tashkent. Tashkent State Technical University, 2024. -439-440 p.
- R.Sh. Sulaymonov, ZJ Omonov. Improving the quality of machine-picked cotton fiber. Current problems of innovative technologies of materials science, welding production, materials extraction and processing in mechanical engineering-2024 // Collection of materials of the International Scientific and Technical Conference. Tashkent. Tashkent State Technical University, October 16-17, 2024. 208-209 p.
- Sulaymanov RS H. , Omonov ZJ, Meliboyev Y., Khasanov O., Ma'murjonov D. Research on the efficiency of a saw gin supplier-cleaner. AIP Conference Proceedings. AIP Publishing 3244, 060003 (2024). https://doi.org/10.1063/5.0242030 . https://pubs.aip.org/aip/issue/3244/1 .
- Sulaymanov R.SH., Omonov Z.J., Ismatov M.N., Rayimkulov A.Q., Saitov U.A. Study of the process of cleaning machine-harvested cotton from small impurities in saw gins. The multidisciplinary journal of science and technology. Vol. 4 Issue 6 | ISSN: 2582-4686 SJIF 2021-3.261, SJIF 2022-2.889, 2024-6.875 Research Bib IF: 8.848 / 2024. www . mjstjournal . com .
- Salimov AM, Lugachev A.Ye., Khodzhiyev MT Technology of primary processing of cotton. “Sparks of literature”. Tashkent. 2018. -184 p.
- Sevostyanov AG, Sevostyanov PA Modelirovaniye tekhnologicheskikh procesov. Moscow, Legkaya i pishevaya promyshlennost, 1980.-344 p.
- Ishlinsky A.Yu. Rolling and volocheniye pri bolshikh skorostyakh deformirovaniya. Practical mechanic. K.1. M: “Nauka”, 1986.
- Ananev IV Kolebaniya uprugix system and machine construction. M. “Mashinostroyeniya”. 1988.-305 p.
- Handbook on the primary processing of cotton. Prepared under the general editorship of FB Omonov. “Cotton Industry Scientific Center” JSC, “Voris-nashriyot”, Tashkent,
- 2008.- 416 p.
- UzDst 644:2006. Cotton . Methods for determining moisture content. Tashkent, 2006.- 17 p.
- UzDst 592-2016. Method for determining the impurity of cotton. Tashkent, 2008, 12 p.
- UzDst 597:2016. Technical cotton seed. Methods for determining the mass fraction of defects in seed. Tashkent, 2011.- 16 p.
- UzDst 601:2016. Cotton. Technical seed. Technical conditions. Methods for determining fiber content. Tashkent, 2016.- 11 p.
- [15].UzDst 632:2010. Cotton fiber . Methods for determining the mass fraction of defects and impurities. Tashkent, 2010.- 19 p.
- Sulaymonov R.Sh., Omonov Z.J., Ismatov M.N. Innovative technology for cleaning cotton from small impurities. Problems and prospects of innovative equipment and technologies in the agricultural food industry // Collection of the IV International Scientific and Technical Conference. -Tashkent. Tashkent State University, 2024. - 482 p.
- Sulaymonov R.Sh., Omonov Z.J., Ismatov M.N., Ongboyev A.M., Saytov U.A. The effectiveness of the cotton cleaning system on foreign saw gins. AMERICAN Journal of Engineering, Mechanics and Architecture Volume 2, Issue 6, 2024 ISSN (E): 2993-2637 www.grnjournal.us
- Sulaymanov R.Sh., Omonov Z.Zh. Improving the quality of machine-picked cotton fiber. Current problems of materials science, welding production, innovative technologies for obtaining and processing materials in mechanical engineering-2024 // Collection of materials of the International Scientific and Technical Conference. Tashkent. Tashkent State University, October 16-17, 2024.604 p.
- Sulaymanov R.Sh., Omonov Z.Zh. Efficiency of foreign saw gin feeders. Integration of science, education, and production in mechanical engineering: trends, problems, and solutions. // Collection of materials of the international scientific and scientific-technical conference.-Tashkent. TashSTU, November 7-8, 2024.
- Sulaymonov R. Sh., Omonov Z.J., Yunusova M.Y. Dusiyorov J.J. Study of the process of cleaning machine-picked cotton from small trash impurities in saw gins. Development of science. Scientific journal. 2025/3 volume 1. ISSN 3030-3907. www.devos.uz
- Malikov Z.M., Nazarov F.Kh., Abdukhamidov S.K., Omonov Z.J. Numerical study of flow in a plane suddenly expanding channel based on Wilcox and two-fluid turbulence models. Journal of Physics: Conference Series.1901 (2021) 012039
- Shoev M., Safarov T., Abdukhamidov S., Omonov Z. Numerical solution of the heat transfer equation using different schemes. E3S Web of Conferences, 04011 IPFA 2023. ISSN 25550403. https://doi.org/10.1051/e3sconf/202345204011