DEVELOPMENT OF A LABORATORY INSTALLATION FOR SYNGAS PRODUCTION FROM ETHANOL VIA CATALYTIC REFORMING

Dadamirzaev H. S., Obidov S. B., Rakhimov H. N. & Mashaev E. E.


Annotatsiya

The production of synthesis gas from renewable feedstocks has attracted significant attention due to the growing demand for sustainable hydrogen and carbon monoxide sources in chemical and energy industries. In this work, a compact laboratory-scale installation for the production of synthesis gas via catalytic reforming of ethanol was designed, constructed, and experimentally evaluated. Ethanol was selected as a promising renewable feedstock due to its availability, low toxicity, and ease of handling compared with gaseous hydrocarbons. The developed system integrates an ethanol feed unit, vaporization chamber, tubular catalytic reactor, electric furnace, condensation unit, and gas analysis module into a single experimental platform that allows stable operation under controlled conditions. Catalytic reforming experiments were carried out using a Ni/Al₂O₃ catalyst at temperatures ranging from 500 to 700 °C under atmospheric pressure. The experimental results demonstrated a strong dependence of ethanol conversion and hydrogen yield on reaction temperature. Ethanol conversion increased from approximately 68% at 500 °C to 96% at 700 °C. Gas chromatography analysis revealed that the product gas consisted mainly of hydrogen and carbon monoxide, confirming the effective formation of synthesis gas. At the highest reaction temperature, hydrogen concentration reached approximately 64%, while methane formation decreased significantly due to enhanced reforming reactions. The results confirm that the developed laboratory installation provides an effective and reliable platform for studying catalytic ethanol reforming and synthesis gas production. The proposed system can be used for catalyst screening, optimization of reaction conditions, and fundamental studies of reforming mechanisms, as well as for educational and research applications in the fields of catalysis, chemical engineering, and hydrogen energy technologies.


Adabiyotlar

  1. Armor, J. N. (1999). The multiple roles for catalysis in the production of H₂. Applied Catalysis A: General, 176(2), 159–176. https://doi.org/10.1016/S0926-860X(98)00299-0
  2. Rostrup-Nielsen, J. R. (2000). New aspects of syngas production and use. Catalysis Today, 63(2–4), 159–164. https://doi.org/10.1016/S0920-5861(00)00454-5
  3. Dry, M. E. (2002). The Fischer–Tropsch process: 1950–2000. Catalysis Today, 71(3–4), 227–241. https://doi.org/10.1016/S0920-5861(01)00453-9
  4. Rostrup-Nielsen, J. R., & Christiansen, L. J. (2011). Concepts in syngas manufacture. Imperial College Press. https://doi.org/10.1142/9781848167786
  5. Balat, M. (2008). Hydrogen-rich gas production from biomass via pyrolysis and gasification. Energy Sources, 30(6), 552–564. https://doi.org/10.1080/15567030600817260
  6. Haryanto, A., Fernando, S., Murali, N., & Adhikari, S. (2005). Current status of hydrogen production techniques by steam reforming of ethanol. Energy & Fuels, 19(5), 2098–2106. https://doi.org/10.1021/ef0500538
  7. Demirbas, A. (2009). Bioethanol from cellulosic materials: A renewable motor fuel. Energy Sources Part A, 31(7), 608–617. https://doi.org/10.1080/15567030701521863
  8. Vaidya, P. D., & Rodrigues, A. E. (2006). Insight into steam reforming of ethanol to produce hydrogen for fuel cells. Chemical Engineering Journal, 117(1), 39–49. https://doi.org/10.1016/j.cej.2005.10.002
  9. Fierro, V., Akdim, O., & Provendier, H. (2005). Ethanol oxidative steam reforming over Ni-based catalysts. Catalysis Today, 102–103, 154–160. https://doi.org/10.1016/j.cattod.2005.02.020
  10. Cavallaro, S. (2000). Ethanol steam reforming on Ni/Al₂O₃ catalysts. Energy & Fuels, 14(6), 1195–1199. https://doi.org/10.1021/ef000070y
  11. Rostrup-Nielsen, J. R., & Sehested, J. (2002). Hydrogen and synthesis gas by steam- and CO₂ reforming. Advances in Catalysis, 47, 65–139. https://doi.org/10.1016/S0360-0564(02)47006-X
  12. Ni, M., Leung, D. Y. C., Leung, M. K. H., & Sumathy, K. (2007). An overview of hydrogen production from biomass. Renewable and Sustainable Energy Reviews, 11(3), 401–425. https://doi.org/10.1016/j.rser.2005.01.009
  13. Navarro, R. M., Peña, M. A., & Fierro, J. L. G. (2007). Hydrogen production reactions from carbon feedstocks. Chemical Reviews, 107(10), 3952–3991. https://doi.org/10.1021/cr0501983
  14. Trane-Restrup, R., Jensen, A. D., & Christensen, K. O. (2013). Catalytic reforming of ethanol for hydrogen production. Applied Catalysis B, 136–137, 158–167. https://doi.org/10.1016/j.apcatb.2013.01.012
  15. Basagiannis, A. C., & Verykios, X. E. (2006). Reforming reactions of ethanol for hydrogen production. International Journal of Hydrogen Energy, 31(14), 2505–2512. https://doi.org/10.1016/j.ijhydene.2006.03.014
  16. Frusteri, F., Freni, S., & Spadaro, L. (2004). Catalytic reforming of ethanol over Ni-based catalysts. Applied Catalysis A, 270(1–2), 1–7. https://doi.org/10.1016/j.apcata.2004.04.020
  17. Biswas, P., & Kunzru, D. (2007). Steam reforming of ethanol for hydrogen production. International Journal of Hydrogen Energy, 32(8), 969–980. https://doi.org/10.1016/j.ijhydene.2006.09.031
  18. Sánchez, E. A., & Comelli, R. A. (2010). Ethanol steam reforming over Ni catalysts. Applied Catalysis A, 380(1–2), 39–47. https://doi.org/10.1016/j.apcata.2010.03.025
  19. Ni, M., Leung, D. Y. C., & Leung, M. K. H. (2006). A review on reforming bio-ethanol for hydrogen production. International Journal of Hydrogen Energy, 31(10), 1401–1412. https://doi.org/10.1016/j.ijhydene.2005.11.001
  20. Sun, J., & Wang, Y. (2014). Recent advances in catalytic conversion of ethanol to hydrogen. ACS Catalysis, 4(4), 1078–1090. https://doi.org/10.1021/cs4011343