SCIENTIFIC AND TECHNICAL ANALYSIS OF RESEARCH ON THE USE OF HEAT PIPES

Ibragimov U. K., Karimova M. N. & Ibragimov S. S.


Annotatsiya

This article presents a scientific and technical analysis of research into the use of heat pipes. The study covers the design features of heat pipes and their operating principles. Specifically, it was established that a heat pipe is a sealed structure, 0.2–0.5% of whose internal volume is filled with a coolant. In the heated portion of the heat pipe (the evaporation zone), the liquid coolant evaporates as a result of heat absorption. The resulting vapor passes into the cooled portion (the condensation zone), where it transfers its latent heat of evaporation to the heat exchanger and condenses. The condensed liquid returns to the evaporation zone under the action of capillary forces or gravity. The study also found that with a nanofluid mass concentration of 1%, the thermal efficiency of the system optimally increases by 16.8%.


Adabiyotlar

  1. Елисеев В.Б., Сергеев Д.И. Что такое тепловая труба? Энергия, 1971. – с. 136.
  2. Xie C.Y., Tao H.Z., Li W., Cheng J.J. Numerical simulation and experimental investigation of heat pipe heat exchanger applied in residual heat removal system. Ann. Nucl. Energy 2019, 133. – p. 568-579.
  3. Sukarno R., Putra N., Hakim I.I., Rachman F.F., Mahlia T.M.I. Utilizing heat pipe heat exchanger to reduce the energy consumption of airborne infection isolation hospital room HVAC system. J. Build. Eng. 2021, 35, 102116. – p. 1-8.
  4. Dobson R., Laubscher R. Heat pipe heat exchanger for high temperature nuclear reactor technology. Front. Heat Pipes 2013, 4, 023002. – p. 1-7.
  5. Brough D., Mezquita A., Ferrer S., Segarra C., Chauhan A., Almahmoud S., Khordehgah N., Ahmad L., Middleton D., Sewell H.I. et al. An experimental study and computational validation of waste heat recovery from a lab scale ceramic kiln using a vertical multi-pass heat pipe heat exchanger. Energy 2020, 208, 118325. – p. 1-19.
  6. Sarafraz M.M., Tlili I., Tian Z., Bakouri M., Safaei M.R. Smart optimization of a thermosyphon heat pipe for an evacuated tube solar collector using response surface methodology (RSM). Phys. A-Stat. Mech. Appl. 2019, 534, 122146.
  7. Tshamala M.C., Dobson R.T. Design of Heat-Pipe Heat Exchanger (Hphe) for a Coal-to-Liquid Fuel Process Using Nuclear Energy. In Proceedings of the 24th International Conference on Nuclear Engineering, Charlotte, NC, USA, 26–30 June 2016; Volume 1. – p. 1-11.
  8. Zhang L.Y., Liu Y.Y., Guo X., Meng X.Z., Jin L.W., Zhang Q.L., Hu W.J. Experimental investigation and economic analysis of gravity heat pipe exchanger applied in communication base station. Appl. Energy 2017, 194. – p. 499-507.
  9. Ma H.T., Du N., Zhang Z.Y., Lyu F., Deng N., Li C., Ye S.J. Assessment of the optimum operation conditions on a heat pipe heat exchanger for waste heat recovery in steel industry. Renew. Sustain. Energy Rev. 2017, 79. – p. 50-60.
  10. Zhang S.W., Song G.H., Xue Z.H. Techno-Economic Assessment of Enamel Heat Pipe Exchanger in a Combined Heat and Power Plant With Back Pressure Turbine. J. Therm. Sci. Eng. Appl. 2021, 13, 044501. – p. 1-4.
  11. Jouhara H., Nieto N., Egilegor B., Zuazua J., Gonz E., Yebra I., Igesias A., Delpech B., Almahmoud S., Brough D. et al. Waste heat recovery solution based on a heat pipe heat exchanger for the aluminum die casting industry. Energy 2023, 266, 126459. – p. 1-17.
  12. Jouhara H., Milko J., Danielewicz J., Sayegh M.A., Szulgowska-Zgrzywa M., Ramos J.B., Lester S.P. The performance of a novel flat heat pipe based thermal and PV/T (photovoltaic and thermal systems) solar collector that can be used as an energy-active building envelope material. Energy 2016, 108. – p. 148-154.
  13. Al-Mabsali S.A., Candido J.P., Chaudhry H.N., Gul M.S. Investigation of an Inclined Heat Pipe Heat Exchanger as a Passive Cooling Mechanism on a Photovoltaic Panel. Energies 2021, 14, 7828. – p. 1-20.
  14. Almahmoud S., Jouhara H. Experimental and theoretical investigation on a radioactive flat heat pipe heat exchanger. Energy 2019, 174. – p. 972-984.
  15. Ramkumar P., Vivek C.M., Ramasamy S., Kajavali A., Sivasubramanian M. Experimental and numerical study using ANFISneuro fuzzy model on heat pipe heat exchanger. Mater. Today-Proc. 2022, 62. – p. 2152-2162.
  16. Noie S.H., Sarmasti Emami M.R., Khoshnoodi M. Effect of inclination angle and filling ratio on thermal performance of a two phase closed thermosyphon under normal operating conditions. Heat transfer engineering, 2007, 28(4). – p. 365-371.
  17. Teng T.P., Hsu H.G., Mo H.E., Chen C.C. Thermal efficiency of heat pipe with alumina nanofluid. Journal of alloys and compounds, 2010, 504. – p. 380-384.
  18. Idrus F., Mohamad N., Zailani R., Wisnoe W., Abdullah M.Z. Thermal performance of a cylindrical heat pipe for different heat inputs and inclination angles. In Applied Mechanics and Materials. 2014, 661. – p. 148-153.
  19. Kang S.W., Wei W.C., Tsai S.H., Yang S.Y. Experimental investigation of silver nanofluid on heat pipe thermal performance. Applied Thermal Engineering, 2006, 26(17-18). – p. 2377-2382.
  20. Plawsky J. Wickless heat pipes in microgravity. Physics today, 2017, 70(9). – p. 82-83.
  21. Huminic G., Huminic A., Morjan I., Dumitrache F. Experimental study of the thermal performance of thermosyphon heat pipe using iron oxide nanoparticles. International Journal of Heat and Mass Transfer, 2011, 54(1-3). – p. 656-661.
  22. Grooten M.H.M., Van Der Geld C.W.M. The effect of the angle of inclination on the operation limiting heat flux of long R-134a filled thermosyphons. Journal of heat transfer, 2010, 132(5). – p. 1-5.
  23. Moraveji M.K., Razvarz S. Experimental investigation of aluminum oxide nanofluid on heat pipe thermal performance. International Communications in Heat and Mass Transfer, 2012, 39(9). – p. 1444-1448.