CLASSIFICATION AND COMPARATIVE ANALYSIS OF HYDROCARBON GAS PROCESSING METHODS

Maxmadiyeva X. . & Yusupova L. .


Annotatsiya

Hydrocarbon gases, particularly methane, represent an important feedstock for the modern chemical and energy industries. Their efficient conversion into value-added products is essential for improving resource utilization and reducing environmental impact. This study presents a comprehensive review and classification of the main methods used for hydrocarbon gas processing, including thermal, catalytic, oxidative, and non-oxidative approaches. The analysis is based on a systematic evaluation of scientific literature published between 2000 and 2025. The results show that thermal processes operate at high temperatures (800-1200 °C) and exhibit relatively low selectivity (20-40%), while catalytic methods demonstrate higher efficiency, with methane conversion reaching 70-98% and selectivity up to 95%. Oxidative processes provide faster reaction rates and lower energy consumption (100-200 MJ/mol CH₄) but are limited by over-oxidation and CO₂ formation. Non-oxidative methods, although promising for the direct production of high-value chemicals such as aromatics, are currently constrained by low conversion (10-30%) and catalyst instability. Overall, catalytic processes remain dominant in industrial applications, while emerging non-oxidative and low-emission technologies offer significant future potential. The study highlights the importance of developing advanced catalytic systems and energy-efficient processes to enhance the sustainability of hydrocarbon gas processing.


Adabiyotlar

  1. Armor, J.N. (1999). The multiple roles for catalysis in the production of H₂. Applied Catalysis A: General, 176(2), 159–176. https://doi.org/10.1016/S0926-860X(98)00286-0
  2. Rostrup-Nielsen, J.R., & Christiansen, L.J. (2011). Concepts in Syngas Manufacture. Imperial College Press. https://doi.org/10.1142/p707
  3. Horn, R., & Schlögl, R. (2015). Methane activation by heterogeneous catalysis. Catalysis Letters, 145(1), 23–39. https://doi.org/10.1007/s10562-014-1417-z
  4. Spivey, J.J., & Hutchings, G. (2014). Catalytic methane combustion: A review. Chemical Society Reviews, 43(3), 792–803. https://doi.org/10.1039/C3CS60259A
  5. Lunsford, J.H. (2000). Catalytic conversion of methane to more useful chemicals and fuels: A challenge for the 21st century. Catalysis Today, 63(2–4), 165–174. https://doi.org/10.1016/S0920-5861(00)00456-9
  6. York, A.P.E., Xiao, T., & Green, M.L.H. (2003). Brief overview of the partial oxidation of methane to synthesis gas. Topics in Catalysis, 22(3–4), 345–358. https://doi.org/10.1023/A:1023552709642
  7. Arutyunov, V.S., & Lisichkin, G.V. (2017). Energy resources of methane and its conversion. Russian Chemical Reviews, 86(8), 777–804. https://doi.org/10.1070/RCR4729
  8. Dry, M.E. (2002). The Fischer–Tropsch process: 1950–2000. Catalysis Today, 71(3–4), 227–241. https://doi.org/10.1016/S0920-5861(01)00453-9
  9. Schwach, P., Pan, X., & Bao, X. (2017). Direct conversion of methane to value-added chemicals over heterogeneous catalysts. Chemical Reviews, 117(13), 8497–8520. https://doi.org/10.1021/acs.chemrev.6b00715
  10. Ravi, M., Ranocchiari, M., & van Bokhoven, J.A. (2017). The direct catalytic oxidation of methane to methanol. Angewandte Chemie International Edition, 56(52), 16464–16483. https://doi.org/10.1002/anie.201702550