OPTICAL–GEOMETRIC ANALYSIS OF A LINEAR FRESNEL CONCENTRATOR WITH A TUBULAR CYLINDRICAL RECEIVER

Kuchkarov А. А.


Annotatsiya

In this paper, linear Fresnel concentrators (LFCs) will be considered as promising equipment used for solar power generation. In particular, such concentrators have a rather simple design, relatively cheap installation procedure, and provide efficient usage of the ground area for their placement. The purpose of this study was to conduct an optical-geometric analysis of linear Fresnel concentrator, which is used with a tubular cylindrical receiver. In general, the goal of the study was to determine the effect of geometrical parameters and position of mirrors on the distribution of concentrated sunlight at the receiver surface. To achieve the stated objectives, a geometric model of concentrator system will be developed based on the theory of sunlight reflection and relative position of the sun, mirror strips, and tubular receiver. As part of this model, several optical parameters will be used, including incidence angles of sunlight, angle between each mirror strip and sunlight ray, receiver height, as well as shading/blocking effect by adjacent mirrors. Based on these parameters, the geometry of sunlight reflection from the mirror field will be estimated along with trajectories of reflected rays towards the cylindrical receiver. As follows from the conducted research, the efficiency of optical processes occurring within linear Fresnel concentrator depends significantly on precise position of individual mirrors and appropriate location of a tubular receiver. In this case, geometric optimization of mirror positioning may result in considerable improvement of radiation interception at the receiver surface and decrease in optical losses.


Adabiyotlar

  1. Memme, S., & Fossa, M. (2023). Ray tracing analysis of linear Fresnel concentrators and the effect of plant azimuth on their optical efficiency. Renewable Energy, 216, 119121.
  2. Rungasamy, A. E., Craig, K. J., & Meyer, J. P. (2021). A review of linear Fresnel primary optical design methodologies. Solar Energy, 224, 833-854.
  3. Abbas, R., & Martínez-Val, J. M. (2017). A comprehensive optical characterization of linear Fresnel collectors by means of an analytic study. Applied Energy, 185, 1136-1151.
  4. Rungasamy, A. E., Craig, K. J., & Meyer, J. P. (2021). A review of linear Fresnel primary optical design methodologies. Solar Energy, 224, 833-854.
  5. Santos, A., Canavarro, D., Arancibia-Bulnes, C. A., Horta, P., & Collares-Pereira, M. (2024). A comparison of secondary optic designs for linear Fresnel collectors with a single tubular absorber. Solar Energy, 282, 112936.
  6. Ajdad, H., Filali Baba, Y., Al Mers, A., Merroun, O., Bouatem, A., & Boutammachte, N. (2019). Particle swarm optimization algorithm for optical-geometric optimization of linear Fresnel solar concentrators. Renewable Energy, 130, 992–1001. https://doi.org/10.1016/j.renene.2018.07.001
  7. Alcalde-Morales, S., Valenzuela, L., & Serrano-Aguilera, J. J. (2023). Heat losses in a trapezoidal cavity receiver of a linear Fresnel collector: A CFD approach. Heliyon, 9(8), e18692. https://doi.org/10.1016/j.heliyon.2023.e18692
  8. Grena, R. (2024). Geometrical aspects of the optics of linear Fresnel concentrators: A review. Energies, 17(14), 3564. https://doi.org/10.3390/en17143564
  9. Heimsath, A., Langenhorst, K., Eichberger, A., & Turchi, C. (2014). Receiver heat loss and temperature distribution prediction for a linear Fresnel solar power plant. Energy Procedia, 49, 386–397. https://doi.org/10.1016/j.egypro.2014.03.042
  10. Lozano, F. J., Matamoros, M., & Rodríguez, P. (2019). Analysis of the potential use of linear Fresnel collector for direct steam generation in industries of the southwest of Europe. Energies, 12(21), 4049. https://doi.org/10.3390/en12214049
  11. Resch, A., & Höller, R. (2023). Optical modeling of a linear Fresnel concentrator for the development of a spectral splitting concentrating photovoltaic thermal receiver. Energies, 16(14), 5373. https://doi.org/10.3390/en16145373
  12. Rungasamy, A. E., Craig, K. J., & Meyer, J. P. (2021). A review of linear Fresnel primary optical design methodologies. Solar Energy, 224, 833–854. https://doi.org/10.1016/j.solener.2021.06.021
  13. Santos, A. J., Canavarro, D., Horta, P., & Collares-Pereira, M. (2021). Analytic design and performance assessment of a flat-plate linear Fresnel reflector. Solar Energy, 227, 203–216. https://doi.org/10.1016/j.solener.2021.08.085
  14. Kuchkarov, A. A., Khaitmukhamedov, A. E., Shukurov, A. O., Dekhkonova, M. K., & Mukhiddinov, M. R. (2020). Calculation of thermal and exergy efficiency of solar power units with linear radiation concentrators. Applied Solar Energy, 56(1), 42-46.
  15. Эргашев, С. Ф., & Нигматов, У. Ж. (2020). Солнечные параболоцилиндрические установки, конструктивные особенности и расчёт отдельных параметров. Universum: технические науки, (11-5 (80)), 51-56.
  16. Кучкаров, А. А., & Муминов, Ш. А. У. (2020). Моделирование и создание плоского френелевского линейного зеркального солнечного концентратора. Universum: технические науки, (3-2 (72)), 80-85.
  17. Ismail M.I. et al. Pathways and challenges of solar thermal utilisation in the industry: ASEAN and Malaysia scenarios // Discover Energy. 2022.
  18. Solar Heat Worldwide 2021 // IEA SHC. 2021. Электрон ресурс.
  19. Tasmin N., Farjana S.H., Hossain M.R., Golder S., Mahmud M.A.P. Integration of Solar Process Heat in Industries: A Review // Clean Technologies. 2022. Vol. 4, no. 1. Art. 8.