INCREASING THE POSITIONING CURRENCY OF MODEL 2550 COORDINATE DRILLING MACHINE THROUGH MODERNIZATION OF THE KINEMATIC SCHEME AND COMPENSATION OF THERMAL DEFORMATIONS OF THE SPINDEL UNDE
Karimova N. K.
Annotatsiya
This article examines the task of improving the technological accuracy of the outdated OS1000MF4 (model 2550) coordinate drilling machine, which is widely used in Uzbekistan's enterprises. It has been shown that the main factors reducing accuracy are low kinematic stiffness, fluctuations in gears, and instability of geometry under the influence of heat release during prolonged operation. Modernization is proposed: replacing mechanical reducers along the X and Y axes with servo drives with digital control, as well as developing a thermal model of the spindle for forecasting and compensating for displacements. Using the finite element method in ANSYS, the stress-strain state of the load-bearing system was modeled. Experimentally, using the Renishaw XL80 laser interferometer, a reduction in positioning error from 9...11 μm to 3...5 μm was confirmed. The implementation of the proposed solutions allowed for a 25% reduction in processing time and a 40% reduction in defects. The results can be used in the modernization of similar metal-cutting machines.
Adabiyotlar
- Mikó, B., & Drégelyi-Kiss, A. (2015). Analysis of positioning accuracy of CNC machine tools. Measurement, 66, 35–42.
- Gao, W., Ibaraki, S., Donmez, M. A., Kono, D., Mayer, J. R. R., & Chen, Y. L. (2023). Machine tool calibration: Measurement, modeling, and compensation of machine tool errors. International Journal of Machine Tools and Manufacture, 187, 104017.
- Wang, Y., Cao, Y., Qu, X., Wang, M., Wang, Y., & Zhang, C. (2025). A review of the application of machine learning techniques in thermal error compensation for CNC machine tools. Measurement, 243, 116341.
- Kombarov, V., Fojtu, P., Sulitka, M., Aksonov, Y., Sveda, J., Tsegelnyk, Y., Sorokin, V., & Plankovskyy, S. (2025). Prediction and compensation of motion differential characteristics influence on position error in CNC machine tools. The International Journal of Advanced Manufacturing Technology, 10.1007/s00170-025-15510-1.
- Li, Y., Zhao, W., Lan, S., Ni, J., Wu, W., & Lu, B. (2015). A review on spindle thermal error compensation in machine tools. International Journal of Machine Tools and Manufacture, 95, 20–38.