IMPROVED DESIGN OF A LIQUID MIXING DEVICE WITH INCLINED DISC BLADES HAVING WAVY SURFACES
Djuraev A. ., Dustova M. . & Oripov D. .
Annotatsiya
This article presents an improved design of a mechanical device intended to intensify the liquid mixing process. The device consists of a reservoir, a drive, a coupling, a working shaft, and three rigidly fixed inclined disc blades with wavy surfaces mounted on the shaft. In the proposed design, liquid components are mixed under the simultaneous action of rotational motion and reciprocating oscillatory motion along the shaft axis. The inclination angles of the upper, middle, and lower blades were selected as 30°, 20°, and 10°, respectively. The amplitudes and frequencies of the blade surface waviness were determined differentially and accepted in the following ratios: A₃ = 3A₁, A₂ = 2A₁, f₁ = 3f₃, and f₂ = 2f₃. Such a parametric solution takes into account the variation in liquid resistance along the depth of the reservoir and ensures effective mixing throughout the entire volume. During rotation, the surface points of the blades produce sinusoidal displacement along the axis, resulting in the formation of axial and radial force components. Therefore, liquid particles acquire complex spatial motion, which increases the mixing intensity. The study analyzes the structural design, operating mechanism, and physical nature of the mixing process. As a result, the proposed construction was substantiated as a promising technical solution for improving mixing efficiency on the basis of a simplified drive system.
Adabiyotlar
- Bakhtiyor Mardonov, Zayniddin Oripov, Rashid Muminov, Jamshed Ravshanov, and Nodirbek Jo‘rayev. Effect of dispersed particles of aluminum oxide on the degree of defects of the crystalline structure of the chromium coating. / E3S Web of Conferences 417, 06001 (2023) GEOTECH-2023 https://doi.org/10.1051/e3sconf/202341706001
- M.G. Yarullin, M.R. Mingazov, Bulletin of Izhevsk State Technical University, 3(63), pp 34-38 (2014).
- R.O. Muminov, A.N. Ruzibaev, N.N. Juraev, J.R. Ravshanov, D.A. Kuziev. Development of measures to enhance the rotation and feed mechanism of a drill rig 2024 ISSN 0041-5790 (Print) • ISSN 2412-8333 (Online) • ugol’– russian Coal Journal, 2024, № 1, pp. 94-99 DOI: http://dx.doi.org/10.18796/0041-5790-2024-1-94-99
- Rashid Muminov, Sherali Yakhshiev, Jamshid Ravshanov, Zayniddin Oripov, Nodirbek Juraev, and Mahbuba Maxmudova. // Development of technical solutions for modernization of the rotary feed mechanism of a quarry drilling rig / E3S Web of Conferences 486,AGRITECH-IX 2023 05007 (2024) https://doi.org/10.1051/e3sconf/202448605007
- N.M. Obitov, А.N. Ruzibaev, AIP Conference Proceedings 2612, 040004 (2023);
- Kuziev, D.A., Pyatova, I.Y., Klement’eva, I.N., Pikhtorinsky, D. Algorithm for the determination of maximum feed drive power of drilling rigs in open pit mining / Mining Informational and Analytical Bulletin, 2019, 2019(1), рр. 128–133. DOI: 10.25018/0236-1493-2019-01-0-128-133