RESEARCH OF THE MILLING PROCESS OF A CYLINDRICAL SURFACE BY AN ORIENTED INSTRUMENT

Otaqoziyev Z. A. & Berdiev U. T.


Annotatsiya

The object of this study is the milling process of a cylindrical surface using a tool whose axis intersects the axis of the workpiece. During the research, generalized modular three-dimensional models were applied to describe the tool surface, material removal, and the formation of the cylindrical surface. These models are based on three unified modules: the tool module, the surface-forming module, and the orientation module. In addition, computer simulation methods were employed to construct a three-dimensional model of the milling process of a cylindrical surface using an oriented cutting tool. A graphical representation of the oriented milling process for a cylindrical surface was developed. A cylindrical surface-forming module of the tool was designed, described by the product of displacement matrices along the corresponding coordinate axes, as well as a model of the machined surface represented by the product of the tool radius vector and its orientation module within the shaft coordinate system. A distribution curve of the specific productivity of the milling process along the tooth profile of the tool was obtained for machining under intersecting axes of the cutter and the workpiece. Analysis of this curve demonstrated that milling with an oriented tool improves the accuracy of surface formation due to more uniform tool wear. The angle between the axes of the cylindrical surface and the tool was determined based on the condition of achieving maximum material removal while ensuring uniform loading of the end part of the milling cutter. For this purpose, a three-dimensional model of the milling process with intersecting axes of the tool and the workpiece was developed, in which rough milling is performed by the end face of the cutter, while finishing is carried out by its peripheral part. The study showed that during finishing milling, the rotation angle of the cutter should be selected to ensure full engagement of the peripheral cutting edges. An increase in machining efficiency is achieved through the intersection of the tool and workpiece axes, which enables programmable control of the intersection point and ensures uniform tool wear, thereby improving the quality of the machined surface. Additionally, the application of high-speed milling is considered a promising approach for further increasing process productivity.


Adabiyotlar

  1. Gryazev, M. V., Stepanenko, A. V. (2010). Perspektivnye tekhnologii obrabotki poverhnostej vrashcheniya frezerovaniem. Izvestiya TulGU. Seriya: Tekhnicheskie nauki, 2 (1), 130–136. Available at: https://cyberleninka.ru/article/n/perspektivnyetehnologii-obrabotki-poverhnostey-vrascheniya-frezerovaniem
  2. Poletaev, V. A., Volkov, D. I. (2001). Osobennosti struzhkoobrazovaniya pri frezerovanii i frezotochenii tel vrashcheniya. Inzhenernyi zhurnal, 7, 18–21.
  3. Kalchenko, V., Sira, N., Kalchenko, D., Aksonova, O. (2018). Investigation of the milling cylindrical surfaces process with tool and shaft crossed axes. Technical sciences and technologies, 4 (14), 18–27. doi:10.25140/2411-5363-2018-4(14)-18-27
  4. Sliednikova, O., Vynnyk, V., Sklyar, V., Aksonova, O. (2019). Modular 3D modeling of tools, process of adaptation removal and forming at milling the cams with crossing tools and details. Technical sciences and technologies, 1 (15), 53–62. doi:10.25140/2411-5363-2019-1(15)-53-62
  5. Gryazev, M. V., Stepanenko, A. V. (2010). Frezerovanie naruzhnyh cilindricheskih poverhnostei torcovymi frezami. Izvestiya TulGU. Seriya Tekhnicheskie nauki, 2 (1), 140–148. Available at: https://cyberleninka.ru/article/n/frezerovanie-naruzhnyhtsilindricheskih-poverhnostey-tortsovymi-frezami
  6. Rubeo, M. A., Schmitz, T. L. (2016). Milling force modeling: A comparison of two approaches. Procedia Manufacturing, 5, 90–105. doi:10.1016/j.promfg.2016.08.010
  7. Tang, D. W., Wang, C. Y., Hu, Y. N., Song, Y. X. (2009). Finite-element simulation of conventional and high-speed peripheral milling of hardened mold steel. Metallurgical and Materials Transactions A, 40 (13), 3245–3257. doi:10.1007/s11661-009-9983-1
  8. Grabchenko, A. I., Kal’chenko, V. I., Kal’chenko, V. V. (2009). Shlifovanie so skreshchivayushchimisya osyami instrumenta i detali. Chernigov: CHDTU.
  9. Kalchenko, V. I., Kalchenko, V. V., Sira, N. M., Kalchenko, D. V. (2016). Modular 3D modeling of tools, material removal processes and forming in grinding with crossed axes. Rezanye i instrument v tekhnologicheskikh sistemakh, 86, 36–48. Available at: http://repository.kpi.kharkov.ua/bitstream/KhPIPress/24131/1/RITS_2016_86_Kalchenko_Modulne.pdf
  10. Krivoruchko, D. V., Zaloga, V. A. (2012). Modelirovanie protsessov rezaniya metodom konechnykh elementov: metodologicheskie osnovy. Sumy: Universitetskaya kniga.
  11. Altintas, Y. (2012). Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design. Cambridge: Cambridge University Press.
  12. Budak, E., Altintas, Y. (1998). Analytical prediction of chatter stability in milling—Part I: General formulation. Journal of Dynamic Systems, Measurement, and Control, 120 (1), 22–30.
  13. Denkena, B., Biermann, D. (2014). Cutting edge geometries. CIRP Annals, 63 (2), 631–653.
  14. Engin, S., Altintas, Y. (2001). Mechanics and dynamics of general milling cutters. International Journal of Machine Tools and Manufacture, 41 (15), 2195–2212.
  15. Smith, S., Tlusty, J. (1991). An overview of modeling and simulation of the milling process. Journal of Engineering for Industry, 113 (2), 169–175.
  16. Schmitz, T. L., Smith, K. S. (2009). Machining Dynamics: Frequency Response to Improved Productivity. New York: Springer.
  17. Wan, M., Zhang, W., Qin, G., Ma, Y. (2015). Efficient calculation of cutting force in milling with arbitrary tool geometry. International Journal of Advanced Manufacturing Technology, 77 (1–4), 93–104.
  18. Ozturk, E., Budak, E. (2010). Modeling of 5-axis milling processes. Machining Science and Technology, 14 (4), 491–514.
  19. Arrazola, P. J., Özel, T., Umbrello, D., Davies, M., Jawahir, I. S. (2013). Recent advances in modeling of metal machining processes. CIRP Annals, 62 (2), 695–718.
  20. Denkena, B., Bergmann, B., Schürmann, S. (2016). Tool orientation in five-axis milling and its influence on surface integrity. Production Engineering, 10 (4), 409–417.