EFFECT OF URETHANE MODIFIER CONTENT ON THE ADHESION EFFICIENCY OF EPOXY COATINGS TO STEEL SURFACE.

Ochilov A. .


Annotatsiya

Existing protective polymer coatings were analyzed, and the effect of urethane and silicon-diurethane modifiers on the adhesion strength of epoxy resins was investigated. The results showed that increasing the ratio of hydroxyurethane to epoxy resin up to 15:85 improves adhesion strength by 20% compared to the initial sample. This improvement is attributed to the increased proportion of urethane bonds in the system. However, increasing the modifier content to 30% leads to a pronounced reduction in strength, which can be attributed to the insufficient availability of epoxy groups necessary for the formation of a cross-linked network during the curing process. The resulting hybrid oligomer is characterized by an epoxy value of 6.84% and an epoxy equivalent weight of 617.3 g/mol. It was also established that increasing the curing temperature from 120 °C to 150 °C reduces the curing time from 90 minutes to 30 minutes. Samples based on silicon-diurethane demonstrated adhesion strength values nearly identical to those of the initial samples across all temperature ranges and curing durations.


Adabiyotlar

  1. Антикоррозионные покрытия для нефтепроводов / К.С. Надиров, А.А. Есентаева, Г.Ж. Биббетова, М.К. Жан- тасов // Нефть и газ. – 2020. – № 2. – С. 109–119.
  2. Ерофеев В.Т. Полиэфирные полимербетоны каркасной структуры: Автореф. дис. … канд. техн. наук. – Харь- ков, 1983. – 23 с.
  3. Жарин Д.Е. Влияние полиизоцианата на физико механические свойства эпоксидных композитов // Пласти- ческие массы. – 2002. – № 7. – С. 38–41.
  4. Оптимальные дисперсность и количество наполнителей для полимербетонов, клеев и мастик / В.И. Солома- тов, Е.Д. Яхнин, Н.Д. Симонов-Емельянов // Строит. материалы. – 1971. – № 12. – С. 24.
  5. Снижение адгезионной способности твердых поверхностей / А.Я. Королев, П.В. Давыдов, Л.М. Виноградова // Адгезия полимеров. – М., 1963. – С. 3–11.
  6. Absoatov Yu., Khalikov A., Akbarov X. Synthesis of hybrid epoxyurethane coatings and their physicochemical char- acteristics // Scientific Journal of Mechanics and Technology. – 2021. – Vol. 3. – P. 87–93.
  7. Afzal A., Siddiqi H.M. A comprehensive study of the bicontinuous epoxy – silica hybrid polymers: I. Synthesis, characterization and glass transition // Polymer. – 2011. – Vol. 52. – P. 13450–13455.
  8. Chauhan D.S., Saji V.S. Heterocyclic Organic Corrosion Inhibitors: Principles and Applications. – Elsevier, 2020. –P. 298.
  9. Hsieh K.H., Han J.L. Graft interpenetrating polymer networks of polyurethane and epoxy. I. Mechanical behavior //
  10. J. Polym. Sci., Part B, Polym. Physics. – 1990. – Vol. 28, № 5. – P. 623–630.
  11. Mazumder M.A.J., Sheardown H., Al-Ahmed A. Functional Polymers. – Springer International Publishing, 2019. – P. 1178.
  12. Mobin M., Shabnam H. Corrosion Behavior of Mild Steel and SS 304L in Presence of Dissolved Copper // Journal of Minerals and Materials Characterization and Engineering. – 2010. – Vol. 9, № 12. – P. 1113–1130.
  13. Park S.J., Jin J.S. Energetic studies on epoxy–polyurethane interpenetrating polymer networks // J. Appl. Polym. Sci. – 2001. – Vol. 82, № 3. – P. 775–780.
  14. Raymond M.P., Bui V.T. Epoxy/castor oil graft interpenetrating polymer networks // J. Appl. Polym. Sci. – 1998. – Vol. 70, № 9. – P. 1649–1659.