INFLUENCE OF BIOMASS COMPOSITION ON THE SURFACE AREA DEVELOPMENT OF BIOCHAR: MINI REVIEW

Sultanov B. S.


Annotatsiya

Biochar surface area depends on both pyrolysis severity and biomass composition. Lignocellulosic structure, ash content, mineral catalysis, and tissue morphology control pore formation during carbonization. Woody biomass typically yields the highest surface area, while agricultural residues and leaves show variable behavior depending on mineral content and structure, as seen in Platanus orientalis. Algae and sludge produce lower surface areas unless activated. Understanding these factors is essential for designing biochars for pollutant adsorption.


Adabiyotlar

  1. Leng L. et al. An overview on engineering the surface area and porosity of biochar // The Science of The Total Environment. 2020. Vol. 763. P. 144204–144204.
  2. Jindo K. et al. Physical and chemical characterization of biochars derived from different agricultural residues // Biogeosciences. 2014. Vol. 11. P. 6613–6621.
  3. Janu R. et al. Biochar surface functional groups as affected by biomass feedstock, biochar composition and pyrolysis temperature // Carbon Resources Conversion. 2021. Vol. 4. P. 36–46.
  4. Edeh I., Mašek O., Fußeis F. 4D structural changes and pore network model of biomass during pyrolysis // Scientific Reports. 2023. Vol. 13. P. 22863–22863.
  5. Collard F., Blin J. A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin // Renewable and Sustainable Energy Reviews. 2014. Vol. 38. P. 594–608.
  6. Chen W.-H. et al. Torrefaction, pyrolysis and two-stage thermodegradation of hemicellulose, cellulose and lignin // Fuel. 2019. Vol. 258. P. 116168–116168.
  7. Li C. et al. Co-pyrolysis of cellulose/lignin and sawdust: Influence of secondary condensation of the volatiles on characteristics of biochar // Energy. 2021. Vol. 226. P. 120442–120442.
  8. Labanya R. et al. Effect of three plant biomasses and two pyrolysis temperatures on structural characteristics of biochar // Chemistry and Ecology. 2022. Vol. 38. P. 430–450.
  9. Leng L. et al. Machine learning predicting and engineering the yield, N content, and specific surface area of biochar derived from pyrolysis of biomass // Biochar. 2022. Vol. 4.
  10. Hai A. et al. Machine learning models for the prediction of total yield and specific surface area of biochar derived from agricultural biomass by pyrolysis // Environmental Technology & Innovation. 2023. Vol. 30. P. 103071–103071.
  11. Giudicianni P. et al. Hemicellulose, cellulose and lignin interactions on Arundo donax steam assisted pyrolysis // Journal of Analytical and Applied Pyrolysis. 2014. Vol. 110. P. 138–146.
  12. Zhao C. et al. Effects of cellulose addition on the physicochemical properties, pore structure and iodine adsorption of lignin-based biochar // Fuel. 2023. Vol. 352. P. 129061–129061.
  13. Li X. et al. Insights into the interactions between cellulose and hemicellulose during pyrolysis for optimizing the properties of biochar as a potential energy vector // Industrial Crops and Products. 2024. Vol. 223. P. 120126–120126.
  14. Wang Q. et al. Transformation mechanism from cork into honeycomb–like biochar with rich hierarchical pore structure during slow pyrolysis // Industrial Crops and Products. 2022. Vol. 181. P. 114827–114827.
  15. Muzyka R. et al. Various biomass pyrolysis conditions influence the porosity and pore size distribution of biochar // Energy. 2022. Vol. 263. P. 126128–126128.
  16. Wijitkosum S. Biochar derived from agricultural wastes and wood residues for sustainable agricultural and environmental applications // International Soil and Water Conservation Research. 2021. Vol. 10. P. 335–341.
  17. Zhao C. et al. Effects of Cellulose Addition on the Physicochemical Properties, Pore Structure and Iodine Adsorption of Lignin-Based Biochar // SSRN Electronic Journal. 2023.