ADVANCED AUTOMATIC CONTROL SYSTEM FOR DISTILLATION PROCESS UNDER UNCERTAINTY BASED ON MPC APPROACH
Sultanov I. R.
Annotatsiya
This paper presents the development of a hybrid automatic control system for a multivariable distillation column operating under uncertainty. The process is characterized by strong nonlinear behavior due to vapor–liquid equilibrium (VLE), significant time delays, and interactions between process variables, which limit the effectiveness of conventional control strategies. A hierarchical control structure is proposed, integrating PID controllers with anti-windup compensation at the lower level, a MIMO-based dynamic model for capturing process interactions, and a nonlinear model predictive control (NMPC) layer for optimal decision-making. The NMPC controller explicitly incorporates nonlinear process dynamics, including VLE relationships, enabling accurate prediction and improved control performance over a wide operating range. The effectiveness of the proposed approach is validated through simulation studies. Comparative analysis with classical PID and linear MPC controllers demonstrates that the NMPC-based system achieves superior performance, including reduced overshoot, faster settling time, and lower integral error indices (ISE and IAE). In addition, the proposed method improves disturbance rejection and enhances energy efficiency. The results confirm that the integration of nonlinear predictive control with multivariable modeling provides a robust and efficient solution for controlling distillation processes under uncertainty, making it suitable for industrial applications.
Adabiyotlar
- Skogestad, S. (1997). Control of distillation columns: A tutorial. Chemical Engineering Research and Design, 75(6), 539–562.
- Seborg, D. E., Edgar, T. F., Mellichamp, D. A., & Doyle, F. J. (2017). Process Dynamics and Control (4th ed.). Wiley.
- Luyben, W. L. (2013). Distillation Design and Control Using Aspen Simulation. Wiley.
- Qin, S. J., & Badgwell, T. A. (2003). A survey of industrial model predictive control technology. Control Engineering Practice, 11(7), 733–764.
- Camacho, E. F., & Bordons, C. (2007). Model Predictive Control (2nd ed.). Springer.
- Åström, K. J., & Hägglund, T. (2006). Advanced PID Control. ISA.
- Rawlings, J. B., Mayne, D. Q., & Diehl, M. (2017). Model Predictive Control: Theory, Computation, and Design (2nd ed.). Nob Hill Publishing.
- García, C. E., Prett, D. M., & Morari, M. (1989). Model predictive control: Theory and practice—A survey. Automatica, 25(3), 335–348.
- Morari, M., & Lee, J. H. (1999). Model predictive control: Past, present and future. Computers & Chemical Engineering, 23(4–5), 667–682.
- Zaccarian, L., & Teel, A. R. (2011). Modern Anti-windup Synthesis: Control Augmentation for Actuator Saturation. Princeton University Press.
- Kothare, M. V., Balakrishnan, V., & Morari, M. (1996). Robust constrained model predictive control using linear matrix inequalities. Automatica, 32(10), 1361–1379.
- Maciejowski, J. M. (2002). Predictive Control with Constraints. Pearson.
- Doherty, M. F., & Malone, M. F. (2001). Conceptual Design of Distillation Systems. McGraw-Hill.
- Smith, R. (2005). Chemical Process Design and Integration. Wiley.
- Geankoplis, C. J. (2003). Transport Processes and Separation Process Principles (4th ed.). Prentice Hall.
- Rectification process control by separation process efficiency evaluation using a predictive model. Djalolitdin Mukhitdinov, Yorkin Kadirov, Ildar Sultanov and Yusuf Avazov EPJ Web Conf., 321 (2025) 01013 DOI: https://doi.org/10.1051/epjconf/202532101013
- Djalolitdin Muhitdinov, Azamat Yusupov, Elyor Safarov, Anvarjon Igamberdiyev, Ildar Sultanov, "An improved device for automated control of mass transfer processes used in distillation units," Proc. SPIE 13217, Third International Conference on Digital Technologies, Optics, and Materials Science (DTIEE 2024), 132170T (31 July 2024); https://doi.org/10.1117/12.3035642
- D P Mukhitdinov et al 2022 J. Phys.: Conf. Ser. 2373 072025. DOI 10.1088/1742-6596/2373/7/072025