IMPROVING THE PRODUCTION TECHNOLOGY OF EX-1200 EXCAVATOR BUCKET TEETH BASED ON TITANIUM MODIFICATION OF 110G13L HIGH-MANGANESE STEEL

Salimjonov X. A., Rasulov I. B., Sayfidinov O. . & Oripov D. R.


Annotatsiya

This article analyzes the improvement of the production technology of EX-1200 excavator bucket teeth based on the titanium modification of 110G13L high-manganese steel in accordance with IMRAD requirements. The research was carried out under the foundry shop conditions of the Navoi Machine-Building Plant Production Association of JSC Navoi Mining and Metallurgical Company. 110G13L steel is used for cast parts operating under high impact loads, abrasive wear, and severe service conditions. In this study, titanium was considered as a modifying element that improves the microstructure of steel, promotes grain refinement, and increases hardness, impact resistance, and wear resistance. For practical experiments, it was determined to add titanium to the melt in amounts of 0.3% and 0.4%. Instead of pure titanium, FTi-35 ferrotitanium containing 35% titanium was used. As a result, 51 kg of ferrotitanium was added to provide 0.3% titanium, while 68.5 kg was added to provide 0.4% titanium. The article systematically describes the stages of designing EX-1200 excavator bucket teeth, metal melting, mold preparation, titanium modification, casting, cleaning, machining, heat treatment, and quality control. The obtained results show that bucket teeth made of titanium-modified 110G13L steel can have improved operational properties.


Adabiyotlar

  1. Doniyor, Toshbotirovich Isaev. "Ion nitriding and surface alloying of H13A hard alloy cutting tools." Zaštita materijala 64.2 (2023): 161-169.
  2. Djurayev A.D., Beknazarov J.Kh., Ashurov Kh.Kh.O. Dynamic analysis of the machine unit in the drive of a transmission reducer waltz machine with a composite, flexible element gear. Theoretical & Applied Science. 2021, No. 11 (103), pp. 401–409. https://doi.org/10.15863/TAS.2021.11.103.35
  3. Григорьев, В. И., & Петров, А. В. (2007). Исследования в области механики резания и моделирования процессов. М.: Издательство МГТУ.
  4. Саидов, И. Т. (2011). Исследования процессов резания и моделирование стружкообразования. Ташкент: УзГТУ.
  5. Доля В. Н. Основы теории резания материалов : конспект лекций по курсу «Теория резания» для студентов специальности 131 «Прикладная механика» / Доля В. Н., Доля О. В. – Харьков : НТУ «ХПИ», 2016. – 182