INVESTIGATION OF THE EFFECT OF TITANIUM ON THE MECHANICAL PROPERTIES OF HIGH-MANGANESE 110G13L STEEL

Salimjonov X. A., Rasulov I. B., Khaydarov O. . & Sayfidinov O. .


Annotatsiya

This article analyzes, based on IMRAD requirements, the issue of improving the mechanical and operational properties of high-manganese 110G13L steel by adding titanium to its composition. The research work was carried out under the production conditions of the “Navoi Machine-Building Plant” Production Association of JSC “Navoi Mining and Metallurgical Combine.” The study examined the processes of melting 110G13L steel, alloying it with FTi-35 ferrotitanium, sample preparation, mechanical machining, surface grinding, and conducting laboratory tests. During the research, ferrotitanium was added to the molten alloy in different amounts in order to refine the steel grains, ensure uniform distribution of carbides, and improve the mechanical properties of the steel. Test samples were taken during the casting process at 5-minute intervals and were subsequently prepared on turning and grinding machines in accordance with laboratory requirements. Tensile testing, impact toughness testing, and hardness measurement methods were used to evaluate the mechanical properties. The research results showed that the addition of titanium increases the microstructural stability of 110G13L steel, restricts grain growth, and contributes to the improvement of its mechanical properties.


Adabiyotlar

  1. Doniyor, Toshbotirovich Isaev. \"Ion nitriding and surface alloying of H13A hard alloy cutting tools.\" Zaštita materijala 64.2 (2023): 161-169.
  2. Djurayev A.D., Beknazarov J.Kh., Ashurov Kh.Kh.O. Dynamic analysis of the machine unit in the drive of a transmission reducer waltz machine with a composite, flexible element gear. Theoretical & Applied Science. 2021, No. 11 (103), pp. 401–409. https://doi.org/10.15863/TAS.2021.11.103.35
  3. Григорьев, В. И., & Петров, А. В. (2007). Исследования в области механики резания и моделирования процессов. М.: Издательство МГТУ.
  4. Саидов, И. Т. (2011). Исследования процессов резания и моделирование стружкообразования. Ташкент: УзГТУ.
  5. Доля В. Н. Основы теории резания материалов : конспект лекций по курсу «Теория резания» для студентов специальности 131 «Прикладная механика» / Доля В. Н., Доля О. В. – Харьков : НТУ «ХПИ», 2016. – 182