ASFALT FREZALASH MASHINASI ISHCHI ORGANLARI UZATISH MEXANIZMINI VA HISOBLASH USULLARINI TAKOMILLASHTIRISH
Rustamov K. J. & Xusenova G. Y.
Annotatsiya
Mazkur maqolada asfalt frezalash mashinasi ishchi organlariga aylantiruvchi moment uzatish jarayonida yuzaga keladigan dinamik yuklama, vibratsiya va quvvat yo‘qotishlarini kamaytirishga qaratilgan elastik-amortizatsiyalovchi uzatma mexanizmi sxemasi hamda uni hisoblashning takomillashtirilgan yondashuvi taklif etildi. Mavjud hisoblash yondashuvlarida frezalash chuqurligi, rotor aylanish soni, asfalt-beton qatlamining zichligi, elastik mufta qattiqligi va amortizatsiya koeffitsienti yetarli darajada birgalikda hisobga olinmasligi aniqlanib, dinamik koeffitsientni ushbu parametrlar asosida aniqlash usuli taklif qilindi. Hisobiy-modellashtirish natijalariga ko‘ra, taklif etilgan uzatma sxemasi oddiy uzatma bilan taqqoslanganda vibratsiya amplitudasini 12-18 % gacha, quvvat yo‘qotishlarini 8-12 % gacha kamaytirish imkonini beradi. Maqolada prinsipial konstruktiv sxema, asosiy geometrik va dinamik parametrlar, hisobiy jadvallar hamda taqqoslovchi grafiklar keltirildi.
Adabiyotlar
- Wirtgen GmbH. The WIRTGEN Cold Milling Manual: The Hands-On Guide to Cold Milling. – Windhagen: Wirtgen GmbH, 2017. – 282 p.
- Wirtgen GmbH. The World of Wirtgen Cold Milling Machines. – Windhagen: Wirtgen GmbH, 2016. – 32 p.
- Meng F., Hu Y., Ma P., Zhang X., Li Z. Practical Control of a Cold Milling Machine Using an Adaptive PID Controller // Applied Sciences. – 2020. – Vol. 10, No. 7. – Article 2516. DOI: 10.3390/app10072516.
- Petrescu M.G., Dumitru T., Laudacescu E., Tănase M. Experimental Investigation and Numerical Analysis Regarding the Influence of Cutting Parameters on the Asphalt Milling Process // Materials. – 2024. – Vol. 17, No. 14. – Article 3475. DOI: 10.3390/ma17143475.
- Yao Y., Yang J., Gao J., Zheng M., Song L., Xu J., Sun C. RAP Chunks Produced in Cold Milling Operation of Asphalt Pavement: Evaluation, Mechanism, and Engineering Investigation in China // Journal of Traffic and Transportation Engineering (English Edition). – 2024. DOI: 10.1016/j.jtte.2024.03.004.
- Zaumanis M., Loetscher D., Mazor S., Stöckli F., Poulikakos L. Impact of Milling Machine Parameters on the Properties of Reclaimed Asphalt Pavement // Construction and Building Materials. – 2021. – Vol. 307. – Article 125114. DOI: 10.1016/j.conbuildmat.2021.125114.
- Dumitru T., Ilincă C., Tănase M. Influence of Technological Parameters on the Behaviour in Operation of the Asphalt Milling Equipment // IOP Conference Series: Materials Science and Engineering. – 2022. – Vol. 1262. – Article 012018. DOI: 10.1088/1757-899X/1262/1/012018.
- Blum J., Anderegg R. Modelling of an Innovative Technology for Pavement Milling // IFAC-PapersOnLine. – 2016. – Vol. 49, Issue 21. – P. 591–597. DOI: 10.1016/j.ifacol.2016.10.665.
- Dumitru T., Petrescu M.G., Tănase M., Laudacescu E. Multi-Response Optimization Analysis of the Milling Process of Asphalt Cutter Teeth // Processes. – 2023. – Vol. 11, No. 8. – Article 2401. DOI: 10.3390/pr11082401.
- Tan X., Zhang Y., Chen L. Study of the Optimization of Matching Between Torsional Vibration Damper and Elastic Coupling in Transmission System Based on Energy Method // Journal of Vibroengineering. – 2017. – Vol. 19, No. 2. – P. 1184–1196.
- Wachel J.C., Szenasi F.R. Analysis of Torsional Vibrations in Rotating Machinery // Proceedings of the 22nd Turbomachinery Symposium. – College Station: Texas A&M University, Turbomachinery Laboratory, 1993. – P. 127–151.
- Rao S.S. Mechanical Vibrations. 5th ed. – Upper Saddle River: Pearson Education, 2011. – 1104 p.
- Norton R.L. Machine Design: An Integrated Approach. 5th ed. – Boston: Pearson, 2014. – 1092 p.
- Shigley J.E., Mischke C.R., Budynas R.G. Mechanical Engineering Design. 10th ed. – New York: McGraw-Hill Education, 2015. – 1120 p.
- Schafer B.T., Bjorge J.R. Transmission System for Transmitting Power from Engine to Milling Rotor in Cold Planer: United States Patent US 9,175,449 B2. – 2015.