MAHALLIY IKKINCHI XOM ASHYOLAR ASOSIDA EURO-5 DIZEL YOQILG‘ISI UCHUN SOVUTUVCHI QO‘SHIMCHALARNI SINTEZLASH VA TRIBOLOGIK BAHOLASH

Akhmedova O. B., Fozilov H. S., Qayumov A. S. & Asadova R. D.


Annotatsiya

Zamonaviy dizel yoqilg'ilaridagi oltingugurt miqdorini kamaytirish ularning moylash xususiyatlarini sezilarli darajada yomonlashtiradi, bu esa yonilg'i tizimi komponentlarining eskirishini oshiradi. Shuning uchun moylash qobiliyatini oshiruvchi samarali qo'shimchalarni ishlab chiqish ekologik toza dizel yoqilg'ilarini ishlab chiqarish uchun muhim vazifaga aylandi. Ushbu tadqiqotda mahalliy ikkilamchi xom ashyolardan sintez qilingan yuqori yog‘li spirtlar asosida moylovchi qo‘shimchalar olish texnologiyasi ishlab chiqildi. Yuqori molekulyar yog'li spirtlar (C12–C17) past molekulyar og'irlikdagi polietilen va parafin uglevodorodlarni bor kislotasi ishtirokida 165–170 °C haroratda oksidlash orqali ishlab chiqarilgan. Maqsadli mahsulotlarning hosildorligi 35-40% ga yetdi. Olingan birikmalar FTIR va GC–MS usullari yordamida tavsiflanib, tarkibida alkogol bo'lgan tuzilmalar hosil bo'lishini tasdiqladi. Sintez qilingan qo'shimchalar dizel yoqilg'isiga kiritildi va ularning moylash xususiyatlari ASTM D6079 (HFRR) usuli bo'yicha baholandi. Qo'shimchaning 0,0163 og'irlik foizi qo'shilishi 60 °C haroratda eskirish chandig'i diametrini 520 mkm dan 400–460 mkm gacha qisqartirdi va bu Evro-5 dizel yoqilg'isi standartlari talablariga javob beradi. Taklif etilayotgan texnologiya mahalliy ikkilamchi resurslardan foydalanish imkonini beradi va ekologik toza kam oltingugurtli dizel yoqilg‘isi ishlab chiqarish uchun import qilinadigan tijorat moylash qo‘shimchalariga samarali muqobil bo‘ladi.


Adabiyotlar

  1. Hancsók, J., Krár, M., Magyar, S., Boda, L., Holló, A., & Kalló, D. (2007). Investigation of the production of high cetane number diesel fuel components. Fuel Processing Technology, 88(4), 393–398. https://doi.org/10.1016/j.fuproc.2006.11.003.
  2. Hill, K. (2000). Fats and oils as oleochemical raw materials. Pure and Applied Chemistry, 72(7), 1255-1264. https://doi.org/10.1351/pac200072071255.
  3. Carlson, K.D., & Chang, S.P. (1985). Chemical modification of fats and oils for industrial applications. Journal of the American Oil Chemists' Society, 62(5), 934–939. https://doi.org/10.1007/BF02541733.
  4. Biermann, U., Bornscheuer, U., Meier, M.A.R., Metzger, J.O., & Schäfer, H.J. (2011). Oils and fats as renewable raw materials in chemistry. Angewandte Chemie International Edition, 50(17), 3854–3871. https://doi.org/10.1002/anie.201002767.
  5. Lurgi GmbH. (2009). Production of fatty alcohols from fatty acid methyl esters by catalytic hydrogenation. Hydrocarbon Processing, 88(9), 95–100.
  6. Rinaldi, R., Schüth, F. (2009). Design of solid catalysts for the selective hydrogenation of fatty acid derivatives. Energy & Environmental Science, 2(6), 610–626. https://doi.org/10.1039/B823218K.
  7. Hancsók, J., Krár, M., Magyar, S., Boda, L., Holló, A., & Kalló, D. (2007). Investigation of the production of high-cetane-number diesel fuel components and additives. Fuel Processing Technology, 88(4), 393–398. https://doi.org/10.1016/j.fuproc.2006.11.003.
  8. Spikes, H. (2004). The history and mechanisms of ZDDP. Tribology Letters, 17(3), 469–489. https://doi.org/10.1023/B:TRIL.0000044495.26882.b5.
  9. Spikes, H. (2004). The history and mechanisms of ZDDP. Tribology Letters, 17(3), 469–489. https://doi.org/10.1023/B:TRIL.0000044495.26882.b5.
  10. Nikanjam, M., Henderson, P.T., & Miller, K.T. (2001). Diesel fuel lubricity: The influence of fuel composition and additives. SAE Technical Paper, 2001-01-1929. https://doi.org/10.4271/2001-01-1929.
  11. Wei, D., Spikes, H.A. (1986). The lubricity of diesel fuels. Wear, 111(2), 217–235. https://doi.org/10.1016/0043-1648(86)90144-5.
  12. Neville, A., Morina, A., Haque, T., & Voong, M. (2007). Compatibility between tribological surfaces and lubricant additives—How friction and wear are controlled by surface interactions. Tribology International, 40(10–12), 1680–1695. https://doi.org/10.1016/j.triboint.2007.01.007.
  13. Lapuerta, M., Rodríguez-Fernández, J., & Agudelo, J.R. (2008). Diesel fuel lubricity: Effect of fuel composition and the impact of sulfur removal. Fuel, 87(10–11), 2000–2008. https://doi.org/10.1016/j.fuel.2007.12.004.
  14. Hu, J., Guo, H., & Li, Y. (2013). Effects of polymeric additives on the lubricity and wear performance of ultra-low sulfur diesel fuel. Tribology International, 65, 12–18. https://doi.org/10.1016/j.triboint.2013.02.008.
  15. Zhang, J., Spikes, H.A. (2016). On the mechanism of diesel fuel lubricity additives. Tribology Letters, 63(3), 1–12. https://doi.org/10.1007/s11249-016-0710-6.
  16. Knothe, G., Sharp, C.A., & Ryan, T.W. (2006). Exhaust emissions of biodiesel, petrodiesel, and blends in a modern diesel engine. Energy & Fuels, 20(1), 403–408. https://doi.org/10.1021/ef0502711.
  17. Anastopoulos, G., Lois, E., & Karonis, D. (2012). Diesel fuel lubricity improvement using synthetic esters derived from fatty acids and alcohols. Fuel, 97, 490–497. https://doi.org/10.1016/j.fuel.2012.01.062.
  18. Spikes, H. (2003). The use of fuel additives to improve diesel fuel lubricity. Tribology Series, 43, 409–418. https://doi.org/10.1016/S0167-8922(03)80119-7.
  19. Hancsók, J., Krár, M., Magyar, S., Boda, L., Holló, A., & Kalló, D. (2007). Investigation of the production of high-cetane-number diesel fuel components and additives. Fuel Processing Technology, 88(4), 393–398. https://doi.org/10.1016/j.fuproc.2006.11.003.
  20. Ҳ.С.Фозилов, С.М.Туробжонов, Б.А.Мавлонов, У.К.Уринов, Д.Р. Атакузиева. Иккиламчи нефт хомашёси парафинни оксидлаш маҳсулотларни гидрогенлаб бирламчи ёғ спиртларни олиш. Композицион материаллар Узбекистон илмий-техникавий ва амалий журнали. 2023. №1. 85-89 б.
  21. Fazilov H.S., Turabjanov S.М., Rajabov R.N. Obtaining higher fatty alcohols from industrial waste, and their application as lubricating additives for diesel fuels // “O‘zbekiston neft va gaz” ilmiy-texnika jurnali. 2022. №2. / aprel, iyun, iyul 41-45 b.
  22. Фозилов С.Ф., Латипов Х.Р., Хотамов К.Ш., Мавлонов Ш.Б., Фозилов Ҳ.С.. Получение высших жирных спиртов на основе отходов и их примемение для смазывающих свойств дизелных топлив // Perspectives of world science and education, Abstracts of V international Scientific and practical conference Osaka, Japan 29-31 January, 2020. 790-794 p.
  23. Фозилов Х.С., Туробжонов С.М., Бектурганова С.С., Фозилов С.Ф. Синтез высщых спиртов для улучшения смазочных свойств дизелных топлив // Труды международной научно-практической конференции «Ауэзовские чтения-21: новый Казахстан-будущее страны» посвященная 80-летию Южно-казахстанского университета им. М.Ауэзова. Шымкент 2023, 40-44 с.
  24. S.M.Turobjonov, H.S.Fozilov, B.A.Mavlonov, S.A.G‘aybullaev, S.F.Fozilov. Quyi molekulali polietilendan dizel yoqilg‘ilari uchun moylovchi prisadkalar olish texnologiyasini ishlab chiqish// “O‘zbekiston neft va gaz” ilmiy-texnika jurnali. 2023. №2. /aprel, май, iyul 47-52 b.
  25. AF, PhD Khuzhakulov, and PhD Akhmedova OB. "TECHNOLOGY of an Environmentally Safe Gas Chemical Complex for Utilization of Sulfur-containing and Flare Gases Discharged From Technological Installations." American Journal of Pedagogical and Educational Research 11 (2023): 159-163.
  26. Ma’ruf, K., Tursoat, A., Dilnavoz, K., Bekmurodjon, R., Ra'no, A., Saida, T., ... & Toshbekov, B. (2025). ZnO Nanoparticles Incorporated on Multi-Walled Carbon Nanotubes as A Robust Heterogeneous Nano-catalyst for Biodiesel Production from Oil. Journal of Nanostructures, 15(3), 1050-1060.
  27. Akhmedova, O. B., & Boboqulov, F. B. (2021). Analysis of the effectiveness of methyldiethanolamine absorbent in the purification of gases. In International scientific-practical online conference" Innovative solutions to current problems in the field of organometallic high-molecular compounds." Tashkent May (Vol. 28, pp. 211-213). https://scholar.google.com/scholar?oi=bibs&cluster=15585973214132099655&btnI=1&hl=ru.
  28. Kh.M.Toshboev, R.Madiev, Sh.P.Nurullaev. Innovative approach to improving the process of obtaining ethylene monomer by pyrolysis // Web of scientist: International scientific research journal. Indonesia, ISSN: 2776-0979, Volume 5, Issue 2, February, 2024. Pp. 366-369. https://wos.academiascience.org.
  29. Фозилов Ҳ.С. Нормал парафин углеводородларни оксидлаб юқори ёғ спиртлари олиш ва уларни дизель ёқилғисининг физик-кимёвий хоссаларини яхшилашда қўллаш//Фан ва технологиялар тараққиёти. Илмий техникавий журнал. Бухоро. 2021. №1. 110-115 б.
  30. Фозилов С.Ф., Латипов Х.Р., Ахмедова О.Б., Нуруллева З.В., Фозилов Ҳ.С. Синтез и изучение многофункциональных присадок на основе местного вторичного сырья для улучшения смазывающих свойств дизельных топлив//Dynamics of the development of world science, Abstracts of V international Scientific and practical conference January 22-24 Vancouver, Canada, 2020. 1056-1060 p.
  31. Fazilov H.S., Turabjanov S.М., Rajabov R.N. Obtaining higher fatty alcohols from industrial waste, and their application as lubricating additives for diesel fuels//“O‘zbekiston neft va gaz” ilmiy-texnika jurnali. 2022. №2./aprel, iyun, iyul 41-45 b.