SOLAR COLLECTOR TECHNOLOGIES FOR COTTON PROCESSING: A COMPREHENSIVE REVIEW ON PERFORMANCE, ECONOMICS, AND SUSTAINABILITY

Mirsultanov I. M.


Annotatsiya

The global cotton industry, while economically vital, is energy-intensive and contributes significantly to environmental degradation through conventional drying methods. This paper presents a comprehensive analytical review of scientific studies and real-world applications of solar collector-based systems for cotton processing, with a primary focus on drying. Our analysis extends beyond a single experimental case to synthesize a wide array of research on Flat-Plate Collectors (FPCs), Evacuated Tube Collectors (ETCs), Parabolic Trough Collectors (PTCs), and hybrid configurations. The consolidated findings reveal that solar thermal technologies can reduce drying time by 40-65%, lower energy consumption by 60-85%, and improve fiber quality metrics. Furthermore, we examine integration with thermal energy storage, economic payback periods (typically 1-5 years), and environmental impact, including CO2 emission reductions of 15-50 tons annually per system. This review conclusively establishes that the strategic deployment of solar collectors is a technologically mature and economically viable pathway towards sustainable and resilient cotton production, urging greater investment support for its widespread adoption.


Adabiyotlar

  1. International Cotton Advisory Committee, “The World Cotton Situation,” 2023.
  2. A. Sharma et al., "Solar-energy drying systems: A review," Renew. Sustain. Energy Rev., vol. 13, no. 6-7, pp. 1185–1210, 2021.
  3. J. T. O. Aviara et al., "Post-harvest losses in African cotton," Agric. Eng. Int., vol. 25, pp. 1–15, 2023.
  4. B. K. Bala and M. R. A. Mondol, "Solar drying for agricultural products," in Solar Drying, 2021.
  5. A. A. El-Sebaii and S. M. Shalaby, "Solar drying of agricultural products," Renew. Sustain. Energy Rev., vol. 16, pp. 37–43, 2022.
  6. M. Kumar et al., "Progress in solar dryers," Renew. Sustain. Energy Rev., vol. 55, pp. 346–360, 2021.
  7. A. Lingayat et al., "Indirect solar dryers," Sol. Energy, vol. 205, pp. 90–108, 2020.
  8. V. R. Mugi and V. P. Chandramohan, "Energy, exergy and economic analysis," J. Clean. Prod., vol. 297, p. 126502, 2021.
  9. R. O. Lamidi et al., "Recent advances in sustainable drying," Appl. Energy, vols. 233-234, pp. 367–385, 2019.
  10. P. Singh and M. K. Gaur, "Advances in solar drying systems," Mater. Today: Proc., vol. 45, pp. 3339–3344, 2021.
  11. M. Kumar, S. K. Sansaniwal, and P. Khatak, "A review on solar dryer performance," Energy Rep., vol. 6, pp. 345-355, 2020.
  12. Y. Zhou et al., "Heat transfer enhancement in a flat-plate solar collector," Appl. Therm. Eng., vol. 181, p. 115929, 2020.
  13. P. Omojaro et al., "Performance of FPC under variable climate," Sol. Energy, vol. 215, pp. 106-118, 2021.
  14. A. Sharma et al., "ETC vs. FPC for fruit drying," J. Food Eng., vol. 284, p. 110057, 2020.
  15. G. Li et al., "Heat-pipe ETC for drying," Renew. Energy, vol. 162, pp. 492-503, 2020.
  16. A. Fudholi et al., "Economic review of solar collectors," Energy Rep., vol. 8, pp. 210-225, 2022.
  17. R. M. Muthusivagami et al., "PTC for industrial drying," Sol. Energy, vol. 211, pp. 1253-1265, 2020.
  18. G. N. Tiwari et al., "Solar thermal systems," in Advances in Solar Energy, 2022.
  19. A. Chaudhary et al., "Biomass-assisted solar dryer," Biomass Bioenergy, vol. 158, p. 106353, 2022.
  20. K. Patel et al., "PVT hybrid dryer," Energy Convers. Manag., vol. 267, p. 115879, 2022.
  21. A. A. El-Sebaii et al., "Finned absorber for FPC," Desalination, vol. 511, p. 115111, 2021.
  22. Y. Zhang et al., "Quantum dot solar concentrators," Nano Energy, vol. 89, p. 106347, 2021.
  23. L. M. Bal et al., "Granite pebble TES," J. Stored Prod. Res., vol. 88, p. 101663, 2020.
  24. H. Atalay et al., "Comparison of sensible storage materials," J. Energy Storage, vol. 44, p. 103434, 2021.
  25. M. S. Sodha et al., "Solar drying with TES," in Solar Crop Drying, 2021.
  26. A. K. Karthikeyan and S. Murugavelh, "PCM-integrated solar dryers," Sol. Energy, vol. 209, pp. 100–120, 2020.
  27. A. Agrawal et al., "Encapsulated PCM for drying," Appl. Therm. Eng., vol. 193, p. 117008, 2021.
  28. C. Liu et al., "Stability of PCMs," Renew. Sustain. Energy Rev., vol. 149, p. 111360, 2021.
  29. S. M. Shalaby et al., "Indirect solar dryer with PCM," Energy Rep., vol. 8, pp. 178-189, 2022.
  30. M. M. Rahman et al., "Bio-based PCMs," J. Clean. Prod., vol. 317, p. 128429, 2021.
  31. Z. Ma et al., "Composite PCM for thermal storage," Energy Storage Mater., vol. 42, pp. 380-394, 2021.
  32. D. Buddhi et al., "Thermal performance of a PCM storage unit," J. Energy Storage, vol. 43, p. 103192, 2021.
  33. Y. Tian et al., "Review on PCM applications," Renew. Sustain. Energy Rev., vol. 143, p. 110917, 2021.
  34. H. S. S. Kumar et al., "Experimental analysis of a solar dryer integrated with PCM," Therm. Sci. Eng. Prog., vol. 25, p. 100985, 2021.
  35. J. M. Mahdi et al., "Hybrid thermal management system," Appl. Energy, vol. 302, p. 117550, 2021.
  36. N. S. Rathore et al., "Performance evaluation of a solar dryer," J. Inst. Eng. India Ser. A, vol. 102, pp. 1-12, 2021.
  37. X. Wang et al., "Effect of drying on cotton fiber quality," Text. Res. J., vol. 91, no. 2, pp. 123-134, 2021.
  38. P. Singh et al., "Quality analysis of solar-dried cotton," J. Nat. Fibers, vol. 19, no. 5, pp. 1234-1245, 2022.
  39. A. Lingayat et al., "Economic analysis of a solar dryer," J. Stored Prod. Res., vol. 89, p. 101725, 2020.
  40. A. Fudholi et al., "Cost analysis of solar drying," Energy Rep., vol. 7, pp. 210-225, 2021.
  41. International Renewable Energy Agency, "Renewable Energy Costs," 2023.
  42. R. O. Lamidi et al., "LCA of solar drying systems," J. Clean. Prod., vol. 278, p. 123945, 2021.
  43. M. Kumar et al., "Environmental impact of solar drying," Environ. Dev. Sustain., vol. 24, pp. 1-25, 2022.
  44. T. M. Yeh et al., "Pollutant reduction via solar thermal," J. Environ. Manage., vol. 291, p. 112687, 2021.
  45. World Bank, "Financing Agritech in Developing Countries," 2022.
  46. FAO, "Skills Gap in Agricultural Engineering," 2021.
  47. ASTM International, "Standard for Testing Solar Dryers," ASTM E3047, 2020.
  48. S. A. Miller et al., "Policy barriers to renewable energy," Energy Policy, vol. 156, p. 112425, 2021.
  49. J. J. Klemeš et al., "Low-cost renewable energy systems," Renew. Energy, vol. 179, pp. 12-25, 2021.
  50. R. K. Rajkumar et al., "AI for hybrid energy systems," Appl. Soft Comput., vol. 114, p. 108083, 2022.